It is advisable to attach the fabric to a rigid support so that it remains taut and we can work on it. It can be removed from this support once the transfer has been made.
Follow the same step by step as with wood application.
1. Print or photocopy the chosen image on plain or thin paper with a laser printer and cut it to the size of the support. Apply the product with a soft brush and spread it evenly and generously.
2. Place the image on the lid of the box and press gently so that it sticks evenly.
3. When the paper is completely dry (several hours), wet it so that it soaks in well. You can continue wetting it later if you need more moisture.
4. Remove wet paper by rubbing with your fingers or a sponge. As the paper is removed, the image adhered to the fabric will appear.
5. Once the image is dry and free of paper remains, fix it with another pass of Photo Transfer product to eliminate the whitish effect.
It is advisable to attach the fabric to a rigid support so that it remains taut and we can work on it. It can be removed from this support once the transfer has been completed,
The garment must be washed by hand and delicately, without rubbing the transfer. Do not iron the garment in the transfer area, or the transfer itself.