PROJECT MATERIALS FINISH GLASS LA PAJARITA

  • 1 Painting painted on tablex or other materials (canvas, cardboard, PVC...)
  • Paper masking tape
  • 1 Kit Finish Glass La Pajarita
  • Solvent Finish Glass La Pajarita
  • Spatula
  • Brush or toothpick
  • Lija
  • A container with a smooth base and walls

STEP BY STEP PROJECT FINISH GLASS LA PAJARITA

1. Paste the paper adhesive tape around the painting, leaving the edge of the tape on the painting side unglued, and the edge of the tape on the back of the painting to be glued as much as possible. Make two turns with the tape.

2. In a container, measure two parts of resin or Component A and then add one part of the hardener or Component B.

3. Mix the two components, stirring well for a couple of minutes. It is advisable to use a spatula and that the container has a smooth base and walls. Once the mixture is homogeneous, we recommend transferring it to another clean container to ensure that there is no remaining product left to mix.

4. Carefully pour the mixture over the entire surface of the painting. finish glass, the adhesive tape will act as a barrier so that the product does not spill outside the frame and also achieve a thick layer.

5. Work the product with a spatula, ensuring that it reaches all the corners and makes contact with all the adhesive tape.

6. During the first minutes you can remove any bubbles that have not yet come out with a toothpick, the mixture of finish glass It will self-level within a few minutes.

7. Let dry for 48 or 72 hours, depending on the thickness of the layer and the room temperature. During this time do not touch the box as the mixture will spoil. It should also be covered so that dust particles do not adhere. When it is completely dry, remove the paper adhesive tape.

8. Once dry, we can carefully sand the edges of the painting to remove any remains of finish glass and leave the surface smooth and uniform.